04
Apr
IRC vs IBC: Which Code Applies to Your Project and Why It Matters
Here’s one of the most expensive mistakes a design or construction firm can make on a small- to mid-sized project: assuming the wrong b...
Blogs
03
Apr
The Real Cost of Working from Outdated As-Builts (vs. Scanning)
The renovation project starts with a confident set of assumptions. The owner hands over a dusty roll of drawings from the last big remo...
02
Apr
Commercial Permit Drawings: What Plan Reviewers Are Actually Looking For
You submit a commercial permit set that would have sailed through on a residential project—well-organized floor plans, clean elevations...
01
Apr
Dynamo for Revit: What It Actually Does for Production Teams (No Coding Required)
It’s the start of a new project, and you can already feel the familiar dread creeping in. Someone on the team is spending the morning m...
31
Mar
How to Run Revit MEP Coordination That Actually Catches Clashes Before the Field Does
The call comes from the site: a framing crew just discovered a 48-inch HVAC duct running straight through the space where a structural ...
30
Mar
Revit Phase Filters Explained: Why Your Demo Plan Looks Wrong (And How to Fix It)
Your demolition plan is showing new work. Or the existing plan is completely blank. Elements are appearing in views where they absolute...
29
Mar
BIM for Home Builders: From One-Off Plans to a Scalable Production System
If you’re a home builder, this probably sounds familiar: every new home plan gets built from scratch. You’re trapped in a cycle of new ...
28
Mar
Metal Stud Frame Layouts: What Your Drywall Contractor Actually Needs from the Model
A metal stud frame partition wall looks simple in Revit. But the difference between a model that saves coordination time and one that c...
27
Mar
Zoning, Setbacks, and FAR: The Code Research That Drives Every Feasibility Study
A client buys a site, their vision is crystal clear, and they come to you ready to start designing. But the architect's first job ...
26
Mar
Parametric Facade Design: How BIM Tools Are Enabling More Complex Building Skins
Building facades have become one of the most expressive and technically complex elements in contemporary architecture. Skins that would...
25
Mar
How to Detail Metal Panel Joints, Reveals, and Transitions in Construction Documents
We’ve all seen it: the metal panel facade that looks stunning in the rendering. Clean lines, crisp reveals, perfectly uniform joints. T...
24
Mar
Gable Roof vs. Hip Roof: Which Is Better for Your Climate and Design Style?
"What kind of roof should we do?" It’s one of the first questions a client asks during schematic design, and the answer is mo...
23
Mar
Prefabricated Wall Panels and Wood Framing: How Documentation Drives Shop Accuracy
Picture this: prefabricated wall panels arrive on site, a crane swings them into place, and a multi-story wood frame goes up in days in...
22
Mar
What Are Spool Drawings? A Practical Guide for Piping Construction
Picture this: a large, prefabricated piping assembly arrives at your job site. A crane lifts it into place between two connection point...
21
Mar
Modeling Mission-Critical Spaces: What Makes Data Center BIM Different
Most BIM teams have production down to a science. Whether it’s an office building, a multifamily complex, or a retail rollout, your wor...
20
Mar
BIM Coordination for High-Performance Window Systems: Getting Glazing Right Before Construction
It’s a moment that makes every project manager's stomach drop: a frantic call from the site. The specified high-performance window...
19
Mar
Area of Refuge, Travel Distance, and Exit Discharge: The Three Life Safety Calculations
Picture this: your project is at 95% CDs. The permit set goes out, and weeks later, the rejection letter lands on your desk. The commen...
18
Mar
Tilt-Up, Pre-Engineered, or Structural Steel: Choosing the Right Warehouse Building System and What It Means for Documentation
A firm wins a 200,000 SF warehouse project. The team celebrates—it seems straightforward, a big box with some docks. But two weeks into...